A novel approach to pulsed laser deposition of platinum catalyst on carbon particles for use in polymer electrolyte membrane fuel cells

• Bogusław Budner,
• Wojciech Tokarz,
• Sławomir Dyjak,
• Andrzej Czerwiński,
• Bartosz Bartosewicz and
• Bartłomiej Jankiewicz

Beilstein J. Nanotechnol. 2023, 14, 190–204, doi:10.3762/bjnano.14.19

• platinum surface unfolding is observed. This observation is evidenced by the increase in current signals registered in the electrode potential areas characteristic of platinum surface processes, the processes of oxidation and reduction of hydrogen at low potentials, and the processes of oxidation of the

Relationship between corrosion and nanoscale friction on a metallic glass

• Haoran Ma and
• Roland Bennewitz

Beilstein J. Nanotechnol. 2022, 13, 236–244, doi:10.3762/bjnano.13.18

• . Taking into account the friction results reported here, we can only conclude that that the outer layer formed during immersion is less compact than that found after polarization with its stronger dissolution. Conclusion Our results reveal the instructive connection between nanoscale friction and surface

• processes on a metallic glass upon immersion in corrosive solutions. Friction coefficients indicate the development of the passivated inner layer of the surface and the growth of a precipitated and displaceable outer layer. Adhesion indicates the accumulation of charge at their interface. The evolution of

Out-of-plane surface patterning by subsurface processing of polymer substrates with focused ion beams

• Serguei Chiriaev,
• Luciana Tavares,
• Vadzim Adashkevich,
• Arkadiusz J. Goszczak and
• Horst-Günter Rubahn

Beilstein J. Nanotechnol. 2020, 11, 1693–1703, doi:10.3762/bjnano.11.151

• of the polymer. Effects of subsurface and surface processes on the surface morphology have been studied for three polymer materials: poly(methyl methacrylate), polycarbonate, and polydimethylsiloxane, by using focused ion beam irradiation with He+, Ne+, and Ga+. Thin films of a Pt60Pd40 alloy and of

• -fluence range. Conclusion In summary, the role of the subsurface and surface processes in the modification of the surface morphology of thin metal films was studied for three types of polymer substrates (PMMA, PC, and PDMS) by exposing these materials to He+, Ne+, and Ga+ FIBs in a Zeiss Orion NanoFab

Direct observation of the CVD growth of monolayer MoS₂ using in situ optical spectroscopy

• Claudia Beatriz López-Posadas,
• Yaxu Wei,
• Wanfu Shen,
• Daniel Kahr,
• Michael Hohage and
• Lidong Sun

Beilstein J. Nanotechnol. 2019, 10, 557–564, doi:10.3762/bjnano.10.57

• , atmosphere, and even high pressure conditions. Consequently, optical spectroscopy is the method of choice for in situ studies during CVD growth. Monitoring the evolution of the optical properties of 2D TMDCs during CVD growth may provide a sensitive means to assess the surface processes and to characterize

Advanced scanning probe lithography using anatase-to-rutile transition to create localized TiO₂ nanorods

• Julian Kalb,
• Vanessa Knittel and
• Lukas Schmidt-Mende

Beilstein J. Nanotechnol. 2019, 10, 412–418, doi:10.3762/bjnano.10.40

• nanostructures. Keywords: hydrothermal crystal growth; lithography; nanostructures; seed crystals; surface processes; oxides; Introduction Rutile TiO2 is a chemically stable semiconductor with a band gap of 3.1 eV [1]. Dependent on the kind of nanostructure and doping, it has outstanding electronic and

In situ characterization of nanoscale contaminations adsorbed in air using atomic force microscopy

• Jesús S. Lacasa,
• Lisa Almonte and
• Jaime Colchero

Beilstein J. Nanotechnol. 2018, 9, 2925–2935, doi:10.3762/bjnano.9.271

• sense. However, in general the precise way in which this contamination affects many surface processes is neither understood in detail nor well controlled. In fact, in our opinion, this issue is often just ignored, in particular in the AFM community. Many more AFM related measurements are performed under

Variation of the photoluminescence spectrum of InAs/GaAs heterostructures grown by ion-beam deposition

• Alexander S. Pashchenko,
• Leonid S. Lunin,
• Eleonora M. Danilina and
• Sergei N. Chebotarev

Beilstein J. Nanotechnol. 2018, 9, 2794–2801, doi:10.3762/bjnano.9.261

• sputtering yield of the target, which affects the kinetics of the surface processes on the substrate. The influence of the thickness of the i-GaAs barrier layer (ST#2 samples) on the photoluminescence properties of the InAs/GaAs heterostructures is shown in Figure 2. It is seen that a decrease in the i-GaAs

Response under low-energy electron irradiation of a thin film of a potential copper precursor for focused electron beam induced deposition (FEBID)

• Leo Sala,
• Iwona B. Szymańska,
• Céline Dablemont,
• Anne Lafosse and
• Lionel Amiaud

Beilstein J. Nanotechnol. 2018, 9, 57–65, doi:10.3762/bjnano.9.8

• fragmentation of the precursor for leaving deposited material of desired composition. Here a new class of copper precursors is studied following an approach that probes some surface processes involved in the fragmentation of precursors. We use complexes of copper(II) with amines and perfluorinated carboxylate

• introduction into vacuum, like the work on Cis-platin particles by Warneke and co-workers [13]. We propose here a similar approach in the apparatus in Orsay devoted to the study of surface processes induced by low-energy electrons in the 0–20 eV range. This range is of particular interest as the low-energy

Investigation of growth dynamics of carbon nanotubes

• Marianna V. Kharlamova

Beilstein J. Nanotechnol. 2017, 8, 826–856, doi:10.3762/bjnano.8.85

Calculating free energies of organic molecules on insulating substrates

• Julian Gaberle,
• David Z. Gao and
• Alexander L. Shluger

Beilstein J. Nanotechnol. 2017, 8, 667–674, doi:10.3762/bjnano.8.71

• molecular dynamics. Both molecules contain the same anchoring groups and benzene ring structures, yet differ in their flexibility. Therefore, the entropic contributions to their free energy differ, which affects surface processes. Using potential of mean force and thermodynamic integration techniques, free

Graphene functionalised by laser-ablated V₂O₅ for a highly sensitive NH₃ sensor

• Margus Kodu,
• Artjom Berholts,
• Tauno Kahro,
• Mati Kook,
• Peeter Ritslaid,
• Helina Seemen,
• Tea Avarmaa,
• Harry Alles and
• Raivo Jaaniso

Beilstein J. Nanotechnol. 2017, 8, 571–578, doi:10.3762/bjnano.8.61

• sensing properties of graphene towards the reducing NH3 gas was achieved. Such an improvement can arise from the strong adsorption ability of NH3 on V2O5 and possible redox reactions on the surface of V2O5, together with the activation of surface processes by using UV light illumination. The changing

Thin SnO_x films for surface plasmon resonance enhanced ellipsometric gas sensing (SPREE)

• Daniel Fischer,
• Andreas Hertwig,
• Uwe Beck,
• Volkmar Lohse,
• Detlef Negendank,
• Martin Kormunda and
• Norbert Esser

Beilstein J. Nanotechnol. 2017, 8, 522–529, doi:10.3762/bjnano.8.56

• that all surface processes generating the measurement effect are faster than the time resolution of the experiment. All changes are fully reversible and the signal regenerates to the initial value within the same time of 9–12 s. As shown in Figure 6 and Figure 7, the signal shows different intensities

Laser irradiation in water for the novel, scalable synthesis of black TiO_x photocatalyst for environmental remediation

• Massimo Zimbone,
• Giuseppe Cacciato,
• Mohamed Boutinguiza,
• Vittorio Privitera and
• Maria Grazia Grimaldi

Beilstein J. Nanotechnol. 2017, 8, 196–202, doi:10.3762/bjnano.8.21

• [23]. It is worth noting the obtained black TiOx has very high absorbance in the full range of solar radiation: in particular, solar radiation spans from 0.5 eV (2.5 µm) to 5 eV (250 nm). Although it depends on other concomitant surface processes, photocatalytic activity benefits from the high

Hydration of magnesia cubes: a helium ion microscopy study

• Ruth Schwaiger,
• Johannes Schneider,
• Gilles R. Bourret and
• Oliver Diwald

Beilstein J. Nanotechnol. 2016, 7, 302–309, doi:10.3762/bjnano.7.28

• example, the drilling of holes into MgO smoke crystals by an electron beam was reported and different surface processes were suggested to occur [19]. Electron-beam irradiation can generate defects and potential nucleation sites for different transformation processes [20], and can thus induce the growth of

Electrocatalysis on the nm scale

• R. Jürgen Behm

Beilstein J. Nanotechnol. 2015, 6, 1008–1009, doi:10.3762/bjnano.6.103

• developed to a stage where a reliable description of complex surface structures and surface processes (at the solid–gas interface) is possible based on first-principles electronic structure theory (in particular, (periodic) density functional theory (DFT)), but it is also increasingly developing new

Palladium nanoparticles anchored to anatase TiO₂ for enhanced surface plasmon resonance-stimulated, visible-light-driven photocatalytic activity

• Kah Hon Leong,
• Hong Ye Chu,
• Shaliza Ibrahim and
• Pichiah Saravanan

Beilstein J. Nanotechnol. 2015, 6, 428–437, doi:10.3762/bjnano.6.43

• performance [29][57]. PL spectra are often employed to understand the surface processes involving the photogenerated electron–hole pairs [58]. The obtained PL spectrum in Figure 8 shows the emission intensity that relates with the recombination rate of the excited electron and hole pairs. Lower PL intensity

Imaging the intracellular degradation of biodegradable polymer nanoparticles

• Anne-Kathrin Barthel,
• Martin Dass,
• Melanie Dröge,
• Jens-Michael Cramer,
• Daniela Baumann,
• Markus Urban,
• Katharina Landfester,
• Volker Mailänder and
• Ingo Lieberwirth

Beilstein J. Nanotechnol. 2014, 5, 1905–1917, doi:10.3762/bjnano.5.201

• much faster decay constant. As already mentioned, in nano-sized particles, surface processes dominate due to the high surface-area-to-volume ratio. So most likely, degradation of any external, intracellular nano-sized object will propagate via its surface. Accordingly, with regards to the magnetite

Surface processes during purification of InP quantum dots

• Natalia Mordvinova,
• Pavel Emelin,
• Alexander Vinokurov,
• Sergey Dorofeev,
• Artem Abakumov and
• Tatiana Kuznetsova

Beilstein J. Nanotechnol. 2014, 5, 1220–1225, doi:10.3762/bjnano.5.135

• optical properties. Two methods of purification were compared and the surface processes which occur during purification were studied. Traditional precipitation with acetone is accompanied by a small increase in photoluminescence. It occurs that during the purification the hydrolysis of the indium

• solutions of QDs [10]. In this paper we compare two methods of InP QDs purification: traditional precipitation and a new electrophoretic technique in an organic solvent and describe the surface processes that occur during purification. Experimental Materials and equipment For synthesis we used high-purity

Nanoscale particles in technological processes of beneficiation

• Sergey I. Popel,
• Vitaly V. Adushkin and
• Anatoly P. Golub'

Beilstein J. Nanotechnol. 2014, 5, 458–465, doi:10.3762/bjnano.5.53

• the present paper shows that the cavitation processes occurring on the interface are occasionally more effective than the bulk cavitation processes [8][9][10][11]. When the initial radius of the cavitation bubble is reduced, the influence of the surface processes, namely condensation, evaporation, and

Photoactivation of luminescence in CdS nanocrystals

• Valentyn Smyntyna,
• Bogdan Semenenko,
• Valentyna Skobeeva and
• Nikolay Malushin

Beilstein J. Nanotechnol. 2014, 5, 355–359, doi:10.3762/bjnano.5.40

• in the valence band. Conclusion The experimental data presented in this paper shows a significant effect of interphase surface processes on the luminescence. Humidity of the air significantly influences the recombination processes in CdS nanocrystals. CdS nanocrystals considered in this study

Reversible mechano-electrochemical writing of metallic nanostructures with the tip of an atomic force microscope

• Christian Obermair,
• Marina Kress,
• Andreas Wagner and
• Thomas Schimmel

Beilstein J. Nanotechnol. 2012, 3, 824–830, doi:10.3762/bjnano.3.92

• are valuable tools for imaging surfaces and surface processes on the nanometer scale. Examples of recent work can be found in the literature [30][31][32][33][34][35][36][37][38][39][40]. At the same time, the scanning tips of the atomic force microscope, the scanning tunneling microscope (STM) and

Macromolecular shape and interactions in layer-by-layer assemblies within cylindrical nanopores

• Thomas D. Lazzara,
• K. H. Aaron Lau,
• Wolfgang Knoll,
• Andreas Janshoff and
• Claudia Steinem

Beilstein J. Nanotechnol. 2012, 3, 475–484, doi:10.3762/bjnano.3.54

• of colloidal particles or cylindrical nanoporous membranes, the direct investigation of surface processes occurring within nanosized pores has been hampered by the limited availability of in situ, high-sensitivity, surface characterization techniques to monitor changes occurring inside the porous